I think I fixed all the bugs mentioned in the previous thread. If any of those issues persist, please report them again, even if you just say "bug X is still happening."
I mostly just fixed bugs, but I also made it so if you join as a spectator and there is an open seat, you don't automatically sit down.
Post any bugs you find here.
When you reveal your deck the cards are shuffled automatically. Some cards are not functional because of that.
Updated without an issue however I'm now unable to log onto the server.
I updated and the program don't launched.
a DOS window open and report "program too big to fit in memory"
Quote from: bruno.bena on May 20, 2011, 09:41:28 AM
I updated and the program don't launched.
a DOS window open and report "program too big to fit in memory"
Get the .exe from the zip in the downloads section. Let me know if that fixes the issue.
get unable to connect to server error. Updated to newest version. Still wont let me log in
Thanks.
It's done. lol
Updated to newest version, havent been able to connect to server for 2 days. went all day yesterday unable to get into the website. Just tryed still cant connect to server
Quote from: Bob the Builder on May 20, 2011, 10:21:06 AM
Updated to newest version, havent been able to connect to server for 2 days. went all day yesterday unable to get into the website. Just tryed still cant connect to server
This is related to the website issue. Things should resolve within 24 hours, or so I was told. Name server info needs to propagate through the interwebs.
Page-Up and Page-Down still respond both on key-press and key-release, instead of just one or the other.
Also, and this has been in Lackey for a while, but, for me at least (running Windows 7), the game program seems to memorize window size from when it was last closed down, but not window position; the end result is, if I maximized it or enlarged it to the point where it covers the top-left corner of the screen, and then close it, next time it loads a good portion of it will be offscreen. Additionally, Windows seems to be unable to instruct it to load pre-maximized.
Quote from: Saethori on May 20, 2011, 02:22:56 PM
Page-Up and Page-Down still respond both on key-press and key-release, instead of just one or the other.
Also, and this has been in Lackey for a while, but, for me at least (running Windows 7), the game program seems to memorize window size from when it was last closed down, but not window position; the end result is, if I maximized it or enlarged it to the point where it covers the top-left corner of the screen, and then close it, next time it loads a good portion of it will be offscreen. Additionally, Windows seems to be unable to instruct it to load pre-maximized.
When you are doing what exactly with Page-up and page-down?
I will investigate that windows windows issues.
Quote from: Saethori on May 20, 2011, 02:22:56 PM
Also, and this has been in Lackey for a while, but, for me at least (running Windows 7), the game program seems to memorize window size from when it was last closed down, but not window position; the end result is, if I maximized it or enlarged it to the point where it covers the top-left corner of the screen, and then close it, next time it loads a good portion of it will be offscreen. Additionally, Windows seems to be unable to instruct it to load pre-maximized.
Ditto. My Lackey always starts off-screen and I have to drag it back. Been happening since I first started. Luckily in windows 7, win+Up arrow will maximize it so it doesn't matter too much.
Quote from: Trevor on May 20, 2011, 08:22:55 PM
When you are doing what exactly with Page-up and page-down?
It occurs for me in the Deck Editor section, while attempting to scroll through cards. I have not yet had a chance to see if it still occurs in chat logs.
Quote from: Saethori on May 20, 2011, 09:06:41 PM
Quote from: Trevor on May 20, 2011, 08:22:55 PM
When you are doing what exactly with Page-up and page-down?
It occurs for me in the Deck Editor section, while attempting to scroll through cards. I have not yet had a chance to see if it still occurs in chat logs.
Ok, fixed in the next posted version.
Hi everybody! This is my first post, i've been using Lackey for a while, and it's great!
I apologize if my English isn't perfect, i try my best but i'm not a native speaker.
I'd like to report a couple of bugs. I'm using the Vtes plugin.
1)In the deck editor area, you can click and drag on a card name and use left\right arrows to decrease\increase the number of cards you are moving.
When you do this, you se the cards near the mouse pointer.
This works fine when you drag from the lower part of the editor (where all the card in the game are shown).
But when you drag from the upper part (the deck list that you are editing) the cards are not shown. It still adds or remove cards like it should, but you don't see them near the mouse pointer.
2) in the preferences->gameplay tab you can set a command to the F1, F2 etc keys. This doesn't work anymore.
I set a command for each key, then press "save preferences". The screen goes to the game area, but it doesn't save my preferences, and the Function keys are still the default commands.
Thanks again!
Quote from: XFede on May 21, 2011, 06:43:15 AM
Hi everybody! This is my first post, i've been using Lackey for a while, and it's great!
I apologize if my English isn't perfect, i try my best but i'm not a native speaker.
I'd like to report a couple of bugs. I'm using the Vtes plugin.
1)In the deck editor area, you can click and drag on a card name and use left\right arrows to decrease\increase the number of cards you are moving.
When you do this, you se the cards near the mouse pointer.
This works fine when you drag from the lower part of the editor (where all the card in the game are shown).
But when you drag from the upper part (the deck list that you are editing) the cards are not shown. It still adds or remove cards like it should, but you don't see them near the mouse pointer.
2) in the preferences->gameplay tab you can set a command to the F1, F2 etc keys. This doesn't work anymore.
I set a command for each key, then press "save preferences". The screen goes to the game area, but it doesn't save my preferences, and the Function keys are still the default commands.
Thanks again!
I fixed the first issue. Rather than fix the 2nd thing, I'm going to implement a whole new key bindings preference window. Not only will it let people change key/button bindings, it will tell them what bindings to what, which most people are ignorant of.
I'd like to report another bug. I don't know if it's the same that Saethori reported, because it is very similar.
In the doomtown plugin thread i read that you can use up and down arrows to change a player stat. I didn't know that, so i immediately opened Lackey to try it.
And it behaves exactly like page up or page down that Saethori described: each press counts for two, one when pressing and one when releasing the button.
Quote from: XFede on May 23, 2011, 02:31:04 AM
I'd like to report another bug. I don't know if it's the same that Saethori reported, because it is very similar.
In the doomtown plugin thread i read that you can use up and down arrows to change a player stat. I didn't know that, so i immediately opened Lackey to try it.
And it behaves exactly like page up or page down that Saethori described: each press counts for two, one when pressing and one when releasing the button.
Haha, ya, I fixed that yesterday. I introduced a number of instances of that kind of key_up bug, and I just needed to find them all and fix them. I fixed it now, and it will work as expected when I post the next version.
If you notice any more instances of keydown and keyup things happening when you expect it just to happen on keydown, let me know.
I just installed the current version on my 11" Macbook Air. However, the initial resolution of the program puts the resizer on the bottom right corner of the window out of my reach. Is there any way to start off with a lower resolution so all window elements are accessible?
Unfortunately this makes the program a little unusable for me. If there is a simple solutions, please let me know!
Thanks!
Quote from: fawx on May 24, 2011, 12:44:47 PM
I just installed the current version on my 11" Macbook Air. However, the initial resolution of the program puts the resizer on the bottom right corner of the window out of my reach. Is there any way to start off with a lower resolution so all window elements are accessible?
Unfortunately this makes the program a little unusable for me. If there is a simple solutions, please let me know!
Thanks!
I'm going to make sure that can't happen. Until then, edit the secure/Preferences.txt file. Change 2 lines to what you want.
MAINWINDOWWIDTH:600
MAINWINDOWHEIGHT:800
or whatever size you want. When you next launch Lackey, it should be that size.
Quote from: Trevor on May 24, 2011, 01:58:40 PMI'm going to make sure that can't happen. Until then, edit the secure/Preferences.txt file. Change 2 lines to what you want.
MAINWINDOWWIDTH:600
MAINWINDOWHEIGHT:800
or whatever size you want. When you next launch Lackey, it should be that size.
Thanks! I think ya got the numbers backwards, as those would make my situation worse ;-) I also see there is a setting:
ISFULLSCREEN:0
Would setting this to 1 also resolve the issue? Maybe defaulting to full screen would be a good option then you don't have to guess about minimum resolutions.
Thanks again for your help!
Quote from: fawx on May 24, 2011, 02:19:15 PM
Quote from: Trevor on May 24, 2011, 01:58:40 PMI'm going to make sure that can't happen. Until then, edit the secure/Preferences.txt file. Change 2 lines to what you want.
MAINWINDOWWIDTH:600
MAINWINDOWHEIGHT:800
or whatever size you want. When you next launch Lackey, it should be that size.
Thanks! I think ya got the numbers backwards, as those would make my situation worse ;-) I also see there is a setting:
ISFULLSCREEN:0
Would setting this to 1 also resolve the issue? Maybe defaulting to full screen would be a good option then you don't have to guess about minimum resolutions.
Thanks again for your help!
Ya, try it.
Quote from: Trevor on May 24, 2011, 02:26:13 PM
Quote from: fawx on May 24, 2011, 02:19:15 PM
Quote from: Trevor on May 24, 2011, 01:58:40 PMI'm going to make sure that can't happen. Until then, edit the secure/Preferences.txt file. Change 2 lines to what you want.
MAINWINDOWWIDTH:600
MAINWINDOWHEIGHT:800
or whatever size you want. When you next launch Lackey, it should be that size.
Thanks! I think ya got the numbers backwards, as those would make my situation worse ;-) I also see there is a setting:
ISFULLSCREEN:0
Would setting this to 1 also resolve the issue? Maybe defaulting to full screen would be a good option then you don't have to guess about minimum resolutions.
Thanks again for your help!
Ya, try it.
Worked perfectly! Thanks!
I'm currently spectating a game and I'm seeing a few issues...
I'm sorry if this has been mentioned, I haven't read every thread...
Cards aren't untapping even though I know they must be for the people playing because on the log it tells me they are tapping them....
Cards in hand are screwy...
I"ll post more as i figure it out.
Quote from: Melkor1010 on May 24, 2011, 09:54:16 PM
I'm currently spectating a game and I'm seeing a few issues...
I'm sorry if this has been mentioned, I haven't read every thread...
Cards aren't untapping even though I know they must be for the people playing because on the log it tells me they are tapping them....
Cards in hand are screwy...
I"ll post more as i figure it out.
I think someone else reported that and I have fixed it but haven't posted the fix.
I posted a new version of lackey. Post bugs in the new thread:
http://www.lackeyccg.com/forum/index.php?topic=1082.0